Upgraded an NT 4 server to WIN2K Server with SQL Server 2000 already
installed. Now getting MSSQLSERVER service startup errors with access
denied despite having domain admin as logon. What gives?
Check the 'logon as' in Control Panel\Services. Did the password for that
account get changed during the upgrade? Or should it be a new login all
together? In any case, check that.
hth
"Terry Johnson" <tjohnson@.contech.com> wrote in message
news:%23etTiUw1EHA.2316@.TK2MSFTNGP15.phx.gbl...
> Upgraded an NT 4 server to WIN2K Server with SQL Server 2000 already
> installed. Now getting MSSQLSERVER service startup errors with access
> denied despite having domain admin as logon. What gives?
>
Showing posts with label denied. Show all posts
Showing posts with label denied. Show all posts
Friday, March 9, 2012
Error 5 Access Denied
Upgraded an NT 4 server to WIN2K Server with SQL Server 2000 already
installed. Now getting MSSQLSERVER service startup errors with access
denied despite having domain admin as logon. What gives'Check the drive in which the Binn files are installed. Make sure they arent
ReadOnly, also try giving explicit rights ot your account to those folders
and try agian.
Thanks.
Vikram Jayaram
Microsoft, SQL Server
This posting is provided "AS IS" with no warranties, and confers no rights.
Subscribe to MSDN & use http://msdn.microsoft.com/newsgroups.
installed. Now getting MSSQLSERVER service startup errors with access
denied despite having domain admin as logon. What gives'Check the drive in which the Binn files are installed. Make sure they arent
ReadOnly, also try giving explicit rights ot your account to those folders
and try agian.
Thanks.
Vikram Jayaram
Microsoft, SQL Server
This posting is provided "AS IS" with no warranties, and confers no rights.
Subscribe to MSDN & use http://msdn.microsoft.com/newsgroups.
Error 5 Access Denied
Upgraded an NT 4 server to WIN2K Server with SQL Server 2000 already
installed. Now getting MSSQLSERVER service startup errors with access
denied despite having domain admin as logon. What gives?
Check the drive in which the Binn files are installed. Make sure they arent
ReadOnly, also try giving explicit rights ot your account to those folders
and try agian.
Thanks.
Vikram Jayaram
Microsoft, SQL Server
This posting is provided "AS IS" with no warranties, and confers no rights.
Subscribe to MSDN & use http://msdn.microsoft.com/newsgroups.
installed. Now getting MSSQLSERVER service startup errors with access
denied despite having domain admin as logon. What gives?
Check the drive in which the Binn files are installed. Make sure they arent
ReadOnly, also try giving explicit rights ot your account to those folders
and try agian.
Thanks.
Vikram Jayaram
Microsoft, SQL Server
This posting is provided "AS IS" with no warranties, and confers no rights.
Subscribe to MSDN & use http://msdn.microsoft.com/newsgroups.
Error 5 Access Denied
Upgraded an NT 4 server to WIN2K Server with SQL Server 2000 already
installed. Now getting MSSQLSERVER service startup errors with access
denied despite having domain admin as logon. What gives'Check the drive in which the Binn files are installed. Make sure they arent
ReadOnly, also try giving explicit rights ot your account to those folders
and try agian.
Thanks.
Vikram Jayaram
Microsoft, SQL Server
This posting is provided "AS IS" with no warranties, and confers no rights.
Subscribe to MSDN & use http://msdn.microsoft.com/newsgroups.
installed. Now getting MSSQLSERVER service startup errors with access
denied despite having domain admin as logon. What gives'Check the drive in which the Binn files are installed. Make sure they arent
ReadOnly, also try giving explicit rights ot your account to those folders
and try agian.
Thanks.
Vikram Jayaram
Microsoft, SQL Server
This posting is provided "AS IS" with no warranties, and confers no rights.
Subscribe to MSDN & use http://msdn.microsoft.com/newsgroups.
Error 5 (Access Denied) and Named Pipes Provider error 40
Hello there,
I recently started having trouble with my local SQL Server 8.0 database server. When I try to start it with Enterprise Manager I get the following error:
An error 5 - (Access is denied) occured while performing this service operation on the MSSQLServer service.
Nothing showed up in the SQL Server error logs. If I try to connect to it using the SQL Server Management Studio that came with SQL Server 2005 I get the following (slightly more informative) message:
Cannot connect to (local) ... (provider: Named Pipes Provider, error 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
I'm not sure which log to look at in the MSSQL folders: MSSQL.1, MSSQL.2 or MSSQL.3.
Furthermore, if I manually start the MSSQLSERVER service, then I can connect just fine with the SQL Server 2005 Management Studio but still get the weird error message with SQL Server 8.0 Enterprise Manager.
Any ideas?
Thanks
Nevermind, I figured out that I had changed the name of my computer. I changed the name back and can now connect to the server just fine.Error 444 - Permission denied.
OK, I'm at a complete loss. Any advice on the following would be greatly
appreciated. What I've got is multiple reports that are heavy process
intensive(multiple datasets, multiple joins, etc). Reports usually take
between 25 and 35 minutes. All was fine until yesterday. Now the reports seem
to run forever. Then finally after an hour we get a 444 error and a
permission denied dialog box. These reports have been running for months
without issue. We've even gone so far as to switch to a new server and still
get the same errors.
Any suggestions?Can you launch SQL Profiler and run a trace and see what connection
credentials are being presented to the dataserver and what the
queries/sprocs are? After capturing the trace you should be able to open
the trace and replay it. My guess is that it is not a SQL issue but this
will help confirm that.
I tried to do some looking up on what error 444 means, is that from MS SQL,
or DB2? or from IIS? Also can you open the Add/Remove Programs, check the
'show updates' box and look for updates installed around the same time as
when the problem started occuring. I've been keeping our machines up to
date and haven't had issue, so not much help here, sorry.
Steve MunLeeuw
"dbutler" <dbutler@.discussions.microsoft.com> wrote in message
news:52C330E6-AEBE-4B59-91C6-99F4E8FD5574@.microsoft.com...
> OK, I'm at a complete loss. Any advice on the following would be greatly
> appreciated. What I've got is multiple reports that are heavy process
> intensive(multiple datasets, multiple joins, etc). Reports usually take
> between 25 and 35 minutes. All was fine until yesterday. Now the reports
> seem
> to run forever. Then finally after an hour we get a 444 error and a
> permission denied dialog box. These reports have been running for months
> without issue. We've even gone so far as to switch to a new server and
> still
> get the same errors.
> Any suggestions?|||I'd also use the RS 2005 Configuration tool to check what accounts are used,
and if they have had a password change or expire. Maybe it's a private key
backup issue...grasping at straws.
Steve MunLeeuw
"dbutler" <dbutler@.discussions.microsoft.com> wrote in message
news:52C330E6-AEBE-4B59-91C6-99F4E8FD5574@.microsoft.com...
> OK, I'm at a complete loss. Any advice on the following would be greatly
> appreciated. What I've got is multiple reports that are heavy process
> intensive(multiple datasets, multiple joins, etc). Reports usually take
> between 25 and 35 minutes. All was fine until yesterday. Now the reports
> seem
> to run forever. Then finally after an hour we get a 444 error and a
> permission denied dialog box. These reports have been running for months
> without issue. We've even gone so far as to switch to a new server and
> still
> get the same errors.
> Any suggestions?|||Thanks Steve. It ended up being exactly that. We switched to a new server,
but our network guy swapped one of the harddrives so it was still 'linked' to
the old server. Once we updated a few keys and played around with RS, we got
it back to working.
"Steve MunLeeuw" wrote:
> I'd also use the RS 2005 Configuration tool to check what accounts are used,
> and if they have had a password change or expire. Maybe it's a private key
> backup issue...grasping at straws.
> Steve MunLeeuw
> "dbutler" <dbutler@.discussions.microsoft.com> wrote in message
> news:52C330E6-AEBE-4B59-91C6-99F4E8FD5574@.microsoft.com...
> > OK, I'm at a complete loss. Any advice on the following would be greatly
> > appreciated. What I've got is multiple reports that are heavy process
> > intensive(multiple datasets, multiple joins, etc). Reports usually take
> > between 25 and 35 minutes. All was fine until yesterday. Now the reports
> > seem
> > to run forever. Then finally after an hour we get a 444 error and a
> > permission denied dialog box. These reports have been running for months
> > without issue. We've even gone so far as to switch to a new server and
> > still
> > get the same errors.
> >
> > Any suggestions?
>
>
appreciated. What I've got is multiple reports that are heavy process
intensive(multiple datasets, multiple joins, etc). Reports usually take
between 25 and 35 minutes. All was fine until yesterday. Now the reports seem
to run forever. Then finally after an hour we get a 444 error and a
permission denied dialog box. These reports have been running for months
without issue. We've even gone so far as to switch to a new server and still
get the same errors.
Any suggestions?Can you launch SQL Profiler and run a trace and see what connection
credentials are being presented to the dataserver and what the
queries/sprocs are? After capturing the trace you should be able to open
the trace and replay it. My guess is that it is not a SQL issue but this
will help confirm that.
I tried to do some looking up on what error 444 means, is that from MS SQL,
or DB2? or from IIS? Also can you open the Add/Remove Programs, check the
'show updates' box and look for updates installed around the same time as
when the problem started occuring. I've been keeping our machines up to
date and haven't had issue, so not much help here, sorry.
Steve MunLeeuw
"dbutler" <dbutler@.discussions.microsoft.com> wrote in message
news:52C330E6-AEBE-4B59-91C6-99F4E8FD5574@.microsoft.com...
> OK, I'm at a complete loss. Any advice on the following would be greatly
> appreciated. What I've got is multiple reports that are heavy process
> intensive(multiple datasets, multiple joins, etc). Reports usually take
> between 25 and 35 minutes. All was fine until yesterday. Now the reports
> seem
> to run forever. Then finally after an hour we get a 444 error and a
> permission denied dialog box. These reports have been running for months
> without issue. We've even gone so far as to switch to a new server and
> still
> get the same errors.
> Any suggestions?|||I'd also use the RS 2005 Configuration tool to check what accounts are used,
and if they have had a password change or expire. Maybe it's a private key
backup issue...grasping at straws.
Steve MunLeeuw
"dbutler" <dbutler@.discussions.microsoft.com> wrote in message
news:52C330E6-AEBE-4B59-91C6-99F4E8FD5574@.microsoft.com...
> OK, I'm at a complete loss. Any advice on the following would be greatly
> appreciated. What I've got is multiple reports that are heavy process
> intensive(multiple datasets, multiple joins, etc). Reports usually take
> between 25 and 35 minutes. All was fine until yesterday. Now the reports
> seem
> to run forever. Then finally after an hour we get a 444 error and a
> permission denied dialog box. These reports have been running for months
> without issue. We've even gone so far as to switch to a new server and
> still
> get the same errors.
> Any suggestions?|||Thanks Steve. It ended up being exactly that. We switched to a new server,
but our network guy swapped one of the harddrives so it was still 'linked' to
the old server. Once we updated a few keys and played around with RS, we got
it back to working.
"Steve MunLeeuw" wrote:
> I'd also use the RS 2005 Configuration tool to check what accounts are used,
> and if they have had a password change or expire. Maybe it's a private key
> backup issue...grasping at straws.
> Steve MunLeeuw
> "dbutler" <dbutler@.discussions.microsoft.com> wrote in message
> news:52C330E6-AEBE-4B59-91C6-99F4E8FD5574@.microsoft.com...
> > OK, I'm at a complete loss. Any advice on the following would be greatly
> > appreciated. What I've got is multiple reports that are heavy process
> > intensive(multiple datasets, multiple joins, etc). Reports usually take
> > between 25 and 35 minutes. All was fine until yesterday. Now the reports
> > seem
> > to run forever. Then finally after an hour we get a 444 error and a
> > permission denied dialog box. These reports have been running for months
> > without issue. We've even gone so far as to switch to a new server and
> > still
> > get the same errors.
> >
> > Any suggestions?
>
>
Sunday, February 19, 2012
ERROR 229: SELECT permission denied on object sysobjects, database ....
Hi,
I granted all the rights on the database to the user (db_owner, public, db_datawriter, etc...) However, I didn't grant the "System Administrators" role. I also specifically granted the select on those tables (sysobjects and sysindexes) for the user and checked through sp_helprotect sysobjects command whether there are no specific revokes for for that user.
However, the user is still getting the below error while trying to expand the "Tables" view in the Enterprise Manager.
ERROR 229: SELECT permission denied on object 'sysobjects', database 'My_test', owner 'dbo', SELECT permission denied on object 'sysindexes', database 'My_test', owner 'dbo'.
Also, the user claims that he cant seem to do anything with the database, he cant view any objects, and, when he goes to Query Analyzer, if he tries to run a SELECT query on a table (that he know that this table exists), he gets this error:
SELECT permission denied on object 'tblBillingTrans', database 'My_Test', owner 'dbo'.
Any help would be greatly appreciated!
Thanks,
AllaPlease disregard this question... I granted the db_denydatareader option... :p
I granted all the rights on the database to the user (db_owner, public, db_datawriter, etc...) However, I didn't grant the "System Administrators" role. I also specifically granted the select on those tables (sysobjects and sysindexes) for the user and checked through sp_helprotect sysobjects command whether there are no specific revokes for for that user.
However, the user is still getting the below error while trying to expand the "Tables" view in the Enterprise Manager.
ERROR 229: SELECT permission denied on object 'sysobjects', database 'My_test', owner 'dbo', SELECT permission denied on object 'sysindexes', database 'My_test', owner 'dbo'.
Also, the user claims that he cant seem to do anything with the database, he cant view any objects, and, when he goes to Query Analyzer, if he tries to run a SELECT query on a table (that he know that this table exists), he gets this error:
SELECT permission denied on object 'tblBillingTrans', database 'My_Test', owner 'dbo'.
Any help would be greatly appreciated!
Thanks,
AllaPlease disregard this question... I granted the db_denydatareader option... :p
Subscribe to:
Posts (Atom)