OK, I'm at a complete loss. Any advice on the following would be greatly
appreciated. What I've got is multiple reports that are heavy process
intensive(multiple datasets, multiple joins, etc). Reports usually take
between 25 and 35 minutes. All was fine until yesterday. Now the reports seem
to run forever. Then finally after an hour we get a 444 error and a
permission denied dialog box. These reports have been running for months
without issue. We've even gone so far as to switch to a new server and still
get the same errors.
Any suggestions?Can you launch SQL Profiler and run a trace and see what connection
credentials are being presented to the dataserver and what the
queries/sprocs are? After capturing the trace you should be able to open
the trace and replay it. My guess is that it is not a SQL issue but this
will help confirm that.
I tried to do some looking up on what error 444 means, is that from MS SQL,
or DB2? or from IIS? Also can you open the Add/Remove Programs, check the
'show updates' box and look for updates installed around the same time as
when the problem started occuring. I've been keeping our machines up to
date and haven't had issue, so not much help here, sorry.
Steve MunLeeuw
"dbutler" <dbutler@.discussions.microsoft.com> wrote in message
news:52C330E6-AEBE-4B59-91C6-99F4E8FD5574@.microsoft.com...
> OK, I'm at a complete loss. Any advice on the following would be greatly
> appreciated. What I've got is multiple reports that are heavy process
> intensive(multiple datasets, multiple joins, etc). Reports usually take
> between 25 and 35 minutes. All was fine until yesterday. Now the reports
> seem
> to run forever. Then finally after an hour we get a 444 error and a
> permission denied dialog box. These reports have been running for months
> without issue. We've even gone so far as to switch to a new server and
> still
> get the same errors.
> Any suggestions?|||I'd also use the RS 2005 Configuration tool to check what accounts are used,
and if they have had a password change or expire. Maybe it's a private key
backup issue...grasping at straws.
Steve MunLeeuw
"dbutler" <dbutler@.discussions.microsoft.com> wrote in message
news:52C330E6-AEBE-4B59-91C6-99F4E8FD5574@.microsoft.com...
> OK, I'm at a complete loss. Any advice on the following would be greatly
> appreciated. What I've got is multiple reports that are heavy process
> intensive(multiple datasets, multiple joins, etc). Reports usually take
> between 25 and 35 minutes. All was fine until yesterday. Now the reports
> seem
> to run forever. Then finally after an hour we get a 444 error and a
> permission denied dialog box. These reports have been running for months
> without issue. We've even gone so far as to switch to a new server and
> still
> get the same errors.
> Any suggestions?|||Thanks Steve. It ended up being exactly that. We switched to a new server,
but our network guy swapped one of the harddrives so it was still 'linked' to
the old server. Once we updated a few keys and played around with RS, we got
it back to working.
"Steve MunLeeuw" wrote:
> I'd also use the RS 2005 Configuration tool to check what accounts are used,
> and if they have had a password change or expire. Maybe it's a private key
> backup issue...grasping at straws.
> Steve MunLeeuw
> "dbutler" <dbutler@.discussions.microsoft.com> wrote in message
> news:52C330E6-AEBE-4B59-91C6-99F4E8FD5574@.microsoft.com...
> > OK, I'm at a complete loss. Any advice on the following would be greatly
> > appreciated. What I've got is multiple reports that are heavy process
> > intensive(multiple datasets, multiple joins, etc). Reports usually take
> > between 25 and 35 minutes. All was fine until yesterday. Now the reports
> > seem
> > to run forever. Then finally after an hour we get a 444 error and a
> > permission denied dialog box. These reports have been running for months
> > without issue. We've even gone so far as to switch to a new server and
> > still
> > get the same errors.
> >
> > Any suggestions?
>
>
Showing posts with label complete. Show all posts
Showing posts with label complete. Show all posts
Friday, March 9, 2012
Wednesday, March 7, 2012
Error 3624 after getting to 100% complete, restoring sql2k db to sql2k5?
Hi All,
Was getting 3624 at 0% until I installed sql2k5 sp2. Now a restore of a
sql2k db gets almost all the way thru, shows 100%, and then I get this 3624
error below.
Any ideas and/or suggestions?
The disk is not full.
Is there any way I can say "don't restore the log file" to isolate a bit?
I tried to run DBCC CHECKDB, but it won't allow it as the db is "in the
process of a restore".
I am not a sql dba, just trying to investigate moving from sql2k -> 2k5.
Thanks in advance!
Derrick
===================================
Restore failed for Server 'localhost\sql2005'. (Microsoft.SqlServer.Smo)
For help, click:
http://go.microsoft.com/fwlink?Prod...er&LinkId=20476
Program Location:
at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
at
Microsoft.SqlServer.Management.SqlManagerUI.SqlRestoreDatabaseOptions.RunRes
tore()
===================================
An exception occurred while executing a Transact-SQL statement or batch.
(Microsoft.SqlServer.ConnectionInfo)
Program Location:
at
Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(Strin
g
sqlCommand, ExecutionTypes executionType)
at
Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(Strin
gCollection
sqlCommands, ExecutionTypes executionType)
at
Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQuery(StringCo
llection
queries)
at
Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessa
ge(StringCollection
queries, ServerMessageEventHandler dbccMessageHandler, Boolean
errorsAsMessages)
at Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server
server, StringCollection queries)
at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
===================================
A system assertion check has failed. Check the SQL Server error log for
details. Typically, an assertion failure is caused by a software bug or data
corruption. To check for database corruption, consider running DBCC CHECKDB.
If you agreed to send dumps to Microsoft during setup, a mini dump will be
sent to Microsoft. An update might be available from Microsoft in the latest
Service Pack or in a QFE from Technical Support. (.Net SqlClient Data
Provider)
For help, click:
http://go.microsoft.com/fwlink?Prod...24&LinkId=20476
Server Name: localhost\sql2005
Error Number: 3624
Severity: 20
State: 1
Line Number: 1
Program Location:
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception,
Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException
exception, Boolean breakConnection)
at
System.Data.SqlClient.TdsParser. ThrowExceptionAndWarning(TdsParserStateO
bjec
t
stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior,
SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet
bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String
methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult
result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at
Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(Strin
g
sqlCommand, ExecutionTypes executionType)And here is a little more detail from the event log.
SQL Server Assertion: File: <container.cpp>, line=3380 Failed Assertion =
'pFcb && pFcb->IsOpen ()'. This error may be timing-related. If the error
persists after rerunning the statement, use DBCC CHECKDB to check the
database for structural integrity, or restart the server to ensure in-memory
data structures are not corrupted.
"Derrick" <derrick@.noreply.com> wrote in message
news:OTJYC$RgHHA.3388@.TK2MSFTNGP02.phx.gbl...
> Hi All,
> Was getting 3624 at 0% until I installed sql2k5 sp2. Now a restore of a
> sql2k db gets almost all the way thru, shows 100%, and then I get this
> 3624 error below.
> Any ideas and/or suggestions?
> The disk is not full.
> Is there any way I can say "don't restore the log file" to isolate a bit?
> I tried to run DBCC CHECKDB, but it won't allow it as the db is "in the
> process of a restore".
> I am not a sql dba, just trying to investigate moving from sql2k -> 2k5.
> Thanks in advance!
> Derrick
>
>
> ===================================
> Restore failed for Server 'localhost\sql2005'. (Microsoft.SqlServer.Smo)
> --
> For help, click:
> http://go.microsoft.com/fwlink?Prod...er&LinkId=20476
> --
> Program Location:
> at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
> at
> Microsoft.SqlServer.Management.SqlManagerUI.SqlRestoreDatabaseOptions.RunR
estore()
> ===================================
> An exception occurred while executing a Transact-SQL statement or batch.
> (Microsoft.SqlServer.ConnectionInfo)
> --
> Program Location:
> at
> Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(Str
ing
> sqlCommand, ExecutionTypes executionType)
> at
> Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(Str
ingCollection
> sqlCommands, ExecutionTypes executionType)
> at
> Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQuery(String
Collection
> queries)
> at
> Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMes
sage(StringCollection
> queries, ServerMessageEventHandler dbccMessageHandler, Boolean
> errorsAsMessages)
> at
> Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server
> server, StringCollection queries)
> at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
> ===================================
> A system assertion check has failed. Check the SQL Server error log for
> details. Typically, an assertion failure is caused by a software bug or
> data corruption. To check for database corruption, consider running DBCC
> CHECKDB. If you agreed to send dumps to Microsoft during setup, a mini
> dump will be sent to Microsoft. An update might be available from
> Microsoft in the latest Service Pack or in a QFE from Technical Support.
> (.Net SqlClient Data Provider)
> --
> For help, click:
> http://go.microsoft.com/fwlink?Prod...24&LinkId=20476
> --
> Server Name: localhost\sql2005
> Error Number: 3624
> Severity: 20
> State: 1
> Line Number: 1
>
> --
> Program Location:
> at System.Data.SqlClient.SqlConnection.OnError(SqlException exception,
> Boolean breakConnection)
> at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException
> exception, Boolean breakConnection)
> at
> System.Data.SqlClient.TdsParser. ThrowExceptionAndWarning(TdsParserStateO
bj
ect
> stateObj)
> at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior,
> SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet
> bulkCopyHandler, TdsParserStateObject stateObj)
> at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String
> methodName, Boolean async)
> at
> System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult
> result, String methodName, Boolean sendToPipe)
> at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
> at
> Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(Str
ing
> sqlCommand, ExecutionTypes executionType)
>
>
Was getting 3624 at 0% until I installed sql2k5 sp2. Now a restore of a
sql2k db gets almost all the way thru, shows 100%, and then I get this 3624
error below.
Any ideas and/or suggestions?
The disk is not full.
Is there any way I can say "don't restore the log file" to isolate a bit?
I tried to run DBCC CHECKDB, but it won't allow it as the db is "in the
process of a restore".
I am not a sql dba, just trying to investigate moving from sql2k -> 2k5.
Thanks in advance!
Derrick
===================================
Restore failed for Server 'localhost\sql2005'. (Microsoft.SqlServer.Smo)
For help, click:
http://go.microsoft.com/fwlink?Prod...er&LinkId=20476
Program Location:
at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
at
Microsoft.SqlServer.Management.SqlManagerUI.SqlRestoreDatabaseOptions.RunRes
tore()
===================================
An exception occurred while executing a Transact-SQL statement or batch.
(Microsoft.SqlServer.ConnectionInfo)
Program Location:
at
Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(Strin
g
sqlCommand, ExecutionTypes executionType)
at
Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(Strin
gCollection
sqlCommands, ExecutionTypes executionType)
at
Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQuery(StringCo
llection
queries)
at
Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessa
ge(StringCollection
queries, ServerMessageEventHandler dbccMessageHandler, Boolean
errorsAsMessages)
at Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server
server, StringCollection queries)
at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
===================================
A system assertion check has failed. Check the SQL Server error log for
details. Typically, an assertion failure is caused by a software bug or data
corruption. To check for database corruption, consider running DBCC CHECKDB.
If you agreed to send dumps to Microsoft during setup, a mini dump will be
sent to Microsoft. An update might be available from Microsoft in the latest
Service Pack or in a QFE from Technical Support. (.Net SqlClient Data
Provider)
For help, click:
http://go.microsoft.com/fwlink?Prod...24&LinkId=20476
Server Name: localhost\sql2005
Error Number: 3624
Severity: 20
State: 1
Line Number: 1
Program Location:
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception,
Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException
exception, Boolean breakConnection)
at
System.Data.SqlClient.TdsParser. ThrowExceptionAndWarning(TdsParserStateO
bjec
t
stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior,
SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet
bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String
methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult
result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at
Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(Strin
g
sqlCommand, ExecutionTypes executionType)And here is a little more detail from the event log.
SQL Server Assertion: File: <container.cpp>, line=3380 Failed Assertion =
'pFcb && pFcb->IsOpen ()'. This error may be timing-related. If the error
persists after rerunning the statement, use DBCC CHECKDB to check the
database for structural integrity, or restart the server to ensure in-memory
data structures are not corrupted.
"Derrick" <derrick@.noreply.com> wrote in message
news:OTJYC$RgHHA.3388@.TK2MSFTNGP02.phx.gbl...
> Hi All,
> Was getting 3624 at 0% until I installed sql2k5 sp2. Now a restore of a
> sql2k db gets almost all the way thru, shows 100%, and then I get this
> 3624 error below.
> Any ideas and/or suggestions?
> The disk is not full.
> Is there any way I can say "don't restore the log file" to isolate a bit?
> I tried to run DBCC CHECKDB, but it won't allow it as the db is "in the
> process of a restore".
> I am not a sql dba, just trying to investigate moving from sql2k -> 2k5.
> Thanks in advance!
> Derrick
>
>
> ===================================
> Restore failed for Server 'localhost\sql2005'. (Microsoft.SqlServer.Smo)
> --
> For help, click:
> http://go.microsoft.com/fwlink?Prod...er&LinkId=20476
> --
> Program Location:
> at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
> at
> Microsoft.SqlServer.Management.SqlManagerUI.SqlRestoreDatabaseOptions.RunR
estore()
> ===================================
> An exception occurred while executing a Transact-SQL statement or batch.
> (Microsoft.SqlServer.ConnectionInfo)
> --
> Program Location:
> at
> Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(Str
ing
> sqlCommand, ExecutionTypes executionType)
> at
> Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(Str
ingCollection
> sqlCommands, ExecutionTypes executionType)
> at
> Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQuery(String
Collection
> queries)
> at
> Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMes
sage(StringCollection
> queries, ServerMessageEventHandler dbccMessageHandler, Boolean
> errorsAsMessages)
> at
> Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server
> server, StringCollection queries)
> at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
> ===================================
> A system assertion check has failed. Check the SQL Server error log for
> details. Typically, an assertion failure is caused by a software bug or
> data corruption. To check for database corruption, consider running DBCC
> CHECKDB. If you agreed to send dumps to Microsoft during setup, a mini
> dump will be sent to Microsoft. An update might be available from
> Microsoft in the latest Service Pack or in a QFE from Technical Support.
> (.Net SqlClient Data Provider)
> --
> For help, click:
> http://go.microsoft.com/fwlink?Prod...24&LinkId=20476
> --
> Server Name: localhost\sql2005
> Error Number: 3624
> Severity: 20
> State: 1
> Line Number: 1
>
> --
> Program Location:
> at System.Data.SqlClient.SqlConnection.OnError(SqlException exception,
> Boolean breakConnection)
> at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException
> exception, Boolean breakConnection)
> at
> System.Data.SqlClient.TdsParser. ThrowExceptionAndWarning(TdsParserStateO
bj
ect
> stateObj)
> at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior,
> SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet
> bulkCopyHandler, TdsParserStateObject stateObj)
> at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String
> methodName, Boolean async)
> at
> System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult
> result, String methodName, Boolean sendToPipe)
> at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
> at
> Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(Str
ing
> sqlCommand, ExecutionTypes executionType)
>
>
Error 3624 after getting to 100% complete, restoring sql2k db to sql2k5?
Hi All,
Was getting 3624 at 0% until I installed sql2k5 sp2. Now a restore of a
sql2k db gets almost all the way thru, shows 100%, and then I get this 3624
error below.
Any ideas and/or suggestions?
The disk is not full.
Is there any way I can say "don't restore the log file" to isolate a bit?
I tried to run DBCC CHECKDB, but it won't allow it as the db is "in the
process of a restore".
I am not a sql dba, just trying to investigate moving from sql2k -> 2k5.
Thanks in advance!
Derrick
===================================
Restore failed for Server 'localhost\sql2005'. (Microsoft.SqlServer.Smo)
--
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476
--
Program Location:
at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
at
Microsoft.SqlServer.Management.SqlManagerUI.SqlRestoreDatabaseOptions.RunRestore()
===================================
An exception occurred while executing a Transact-SQL statement or batch.
(Microsoft.SqlServer.ConnectionInfo)
--
Program Location:
at
Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String
sqlCommand, ExecutionTypes executionType)
at
Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(StringCollection
sqlCommands, ExecutionTypes executionType)
at
Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQuery(StringCollection
queries)
at
Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessage(StringCollection
queries, ServerMessageEventHandler dbccMessageHandler, Boolean
errorsAsMessages)
at Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server
server, StringCollection queries)
at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
===================================
A system assertion check has failed. Check the SQL Server error log for
details. Typically, an assertion failure is caused by a software bug or data
corruption. To check for database corruption, consider running DBCC CHECKDB.
If you agreed to send dumps to Microsoft during setup, a mini dump will be
sent to Microsoft. An update might be available from Microsoft in the latest
Service Pack or in a QFE from Technical Support. (.Net SqlClient Data
Provider)
--
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=3624&LinkId=20476
--
Server Name: localhost\sql2005
Error Number: 3624
Severity: 20
State: 1
Line Number: 1
--
Program Location:
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception,
Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException
exception, Boolean breakConnection)
at
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior,
SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet
bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String
methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult
result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at
Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String
sqlCommand, ExecutionTypes executionType)And here is a little more detail from the event log.
SQL Server Assertion: File: <container.cpp>, line=3380 Failed Assertion ='pFcb && pFcb->IsOpen ()'. This error may be timing-related. If the error
persists after rerunning the statement, use DBCC CHECKDB to check the
database for structural integrity, or restart the server to ensure in-memory
data structures are not corrupted.
"Derrick" <derrick@.noreply.com> wrote in message
news:OTJYC$RgHHA.3388@.TK2MSFTNGP02.phx.gbl...
> Hi All,
> Was getting 3624 at 0% until I installed sql2k5 sp2. Now a restore of a
> sql2k db gets almost all the way thru, shows 100%, and then I get this
> 3624 error below.
> Any ideas and/or suggestions?
> The disk is not full.
> Is there any way I can say "don't restore the log file" to isolate a bit?
> I tried to run DBCC CHECKDB, but it won't allow it as the db is "in the
> process of a restore".
> I am not a sql dba, just trying to investigate moving from sql2k -> 2k5.
> Thanks in advance!
> Derrick
>
>
> ===================================> Restore failed for Server 'localhost\sql2005'. (Microsoft.SqlServer.Smo)
> --
> For help, click:
> http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476
> --
> Program Location:
> at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
> at
> Microsoft.SqlServer.Management.SqlManagerUI.SqlRestoreDatabaseOptions.RunRestore()
> ===================================> An exception occurred while executing a Transact-SQL statement or batch.
> (Microsoft.SqlServer.ConnectionInfo)
> --
> Program Location:
> at
> Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String
> sqlCommand, ExecutionTypes executionType)
> at
> Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(StringCollection
> sqlCommands, ExecutionTypes executionType)
> at
> Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQuery(StringCollection
> queries)
> at
> Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessage(StringCollection
> queries, ServerMessageEventHandler dbccMessageHandler, Boolean
> errorsAsMessages)
> at
> Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server
> server, StringCollection queries)
> at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
> ===================================> A system assertion check has failed. Check the SQL Server error log for
> details. Typically, an assertion failure is caused by a software bug or
> data corruption. To check for database corruption, consider running DBCC
> CHECKDB. If you agreed to send dumps to Microsoft during setup, a mini
> dump will be sent to Microsoft. An update might be available from
> Microsoft in the latest Service Pack or in a QFE from Technical Support.
> (.Net SqlClient Data Provider)
> --
> For help, click:
> http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=3624&LinkId=20476
> --
> Server Name: localhost\sql2005
> Error Number: 3624
> Severity: 20
> State: 1
> Line Number: 1
>
> --
> Program Location:
> at System.Data.SqlClient.SqlConnection.OnError(SqlException exception,
> Boolean breakConnection)
> at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException
> exception, Boolean breakConnection)
> at
> System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
> stateObj)
> at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior,
> SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet
> bulkCopyHandler, TdsParserStateObject stateObj)
> at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String
> methodName, Boolean async)
> at
> System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult
> result, String methodName, Boolean sendToPipe)
> at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
> at
> Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String
> sqlCommand, ExecutionTypes executionType)
>
>
Was getting 3624 at 0% until I installed sql2k5 sp2. Now a restore of a
sql2k db gets almost all the way thru, shows 100%, and then I get this 3624
error below.
Any ideas and/or suggestions?
The disk is not full.
Is there any way I can say "don't restore the log file" to isolate a bit?
I tried to run DBCC CHECKDB, but it won't allow it as the db is "in the
process of a restore".
I am not a sql dba, just trying to investigate moving from sql2k -> 2k5.
Thanks in advance!
Derrick
===================================
Restore failed for Server 'localhost\sql2005'. (Microsoft.SqlServer.Smo)
--
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476
--
Program Location:
at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
at
Microsoft.SqlServer.Management.SqlManagerUI.SqlRestoreDatabaseOptions.RunRestore()
===================================
An exception occurred while executing a Transact-SQL statement or batch.
(Microsoft.SqlServer.ConnectionInfo)
--
Program Location:
at
Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String
sqlCommand, ExecutionTypes executionType)
at
Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(StringCollection
sqlCommands, ExecutionTypes executionType)
at
Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQuery(StringCollection
queries)
at
Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessage(StringCollection
queries, ServerMessageEventHandler dbccMessageHandler, Boolean
errorsAsMessages)
at Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server
server, StringCollection queries)
at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
===================================
A system assertion check has failed. Check the SQL Server error log for
details. Typically, an assertion failure is caused by a software bug or data
corruption. To check for database corruption, consider running DBCC CHECKDB.
If you agreed to send dumps to Microsoft during setup, a mini dump will be
sent to Microsoft. An update might be available from Microsoft in the latest
Service Pack or in a QFE from Technical Support. (.Net SqlClient Data
Provider)
--
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=3624&LinkId=20476
--
Server Name: localhost\sql2005
Error Number: 3624
Severity: 20
State: 1
Line Number: 1
--
Program Location:
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception,
Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException
exception, Boolean breakConnection)
at
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior,
SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet
bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String
methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult
result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at
Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String
sqlCommand, ExecutionTypes executionType)And here is a little more detail from the event log.
SQL Server Assertion: File: <container.cpp>, line=3380 Failed Assertion ='pFcb && pFcb->IsOpen ()'. This error may be timing-related. If the error
persists after rerunning the statement, use DBCC CHECKDB to check the
database for structural integrity, or restart the server to ensure in-memory
data structures are not corrupted.
"Derrick" <derrick@.noreply.com> wrote in message
news:OTJYC$RgHHA.3388@.TK2MSFTNGP02.phx.gbl...
> Hi All,
> Was getting 3624 at 0% until I installed sql2k5 sp2. Now a restore of a
> sql2k db gets almost all the way thru, shows 100%, and then I get this
> 3624 error below.
> Any ideas and/or suggestions?
> The disk is not full.
> Is there any way I can say "don't restore the log file" to isolate a bit?
> I tried to run DBCC CHECKDB, but it won't allow it as the db is "in the
> process of a restore".
> I am not a sql dba, just trying to investigate moving from sql2k -> 2k5.
> Thanks in advance!
> Derrick
>
>
> ===================================> Restore failed for Server 'localhost\sql2005'. (Microsoft.SqlServer.Smo)
> --
> For help, click:
> http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476
> --
> Program Location:
> at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
> at
> Microsoft.SqlServer.Management.SqlManagerUI.SqlRestoreDatabaseOptions.RunRestore()
> ===================================> An exception occurred while executing a Transact-SQL statement or batch.
> (Microsoft.SqlServer.ConnectionInfo)
> --
> Program Location:
> at
> Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String
> sqlCommand, ExecutionTypes executionType)
> at
> Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(StringCollection
> sqlCommands, ExecutionTypes executionType)
> at
> Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQuery(StringCollection
> queries)
> at
> Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessage(StringCollection
> queries, ServerMessageEventHandler dbccMessageHandler, Boolean
> errorsAsMessages)
> at
> Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server
> server, StringCollection queries)
> at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
> ===================================> A system assertion check has failed. Check the SQL Server error log for
> details. Typically, an assertion failure is caused by a software bug or
> data corruption. To check for database corruption, consider running DBCC
> CHECKDB. If you agreed to send dumps to Microsoft during setup, a mini
> dump will be sent to Microsoft. An update might be available from
> Microsoft in the latest Service Pack or in a QFE from Technical Support.
> (.Net SqlClient Data Provider)
> --
> For help, click:
> http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=3624&LinkId=20476
> --
> Server Name: localhost\sql2005
> Error Number: 3624
> Severity: 20
> State: 1
> Line Number: 1
>
> --
> Program Location:
> at System.Data.SqlClient.SqlConnection.OnError(SqlException exception,
> Boolean breakConnection)
> at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException
> exception, Boolean breakConnection)
> at
> System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
> stateObj)
> at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior,
> SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet
> bulkCopyHandler, TdsParserStateObject stateObj)
> at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String
> methodName, Boolean async)
> at
> System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult
> result, String methodName, Boolean sendToPipe)
> at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
> at
> Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String
> sqlCommand, ExecutionTypes executionType)
>
>
Subscribe to:
Posts (Atom)