Hi,
I got the following error message for one of our databases:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 17052
Date: 3/25/2005
Time: 9:18:53 AM
User: XXXXXXXX\Administrator
Computer: XXXXXX
Description:
Error: 644, Severity: 21, State: 3
Could not find the index entry for RID '16c42dc515100' in index page
(1:1725), index ID 0, database 'XXXXXXXXX_XXXXX_XXX_MSCRM'.
I looked up the error in Books Online and it told me to run DBCC CHECKDB to
see the extent of the damage. It gave me the following result:
Server: Msg 8952, Level 16, State 1, Line 1
Table error: Database 'XXXXXXXXX_XXXXX_XXX_MSCRM', index
'sysobjects.ncsysobjects2' (ID 1) (index ID 3). Extra or invalid key for the
keys:
Server: Msg 8956, Level 16, State 1, Line 1
Index row (1:155:91) with values (parent_obj = 1237579447 and id =
365243844) points to the data row identified by ().
DBCC results for 'XXXXXXXXX_XXXXX_XXX_MSCRM'.
DBCC results for 'sysobjects'.
There are 2315 rows in 49 pages for object 'sysobjects'.
CHECKDB found 0 allocation errors and 1 consistency errors in table
'sysobjects' (object ID 1).
These don't seem to match. Should they?
The next thing that Books Online says to do is to run DBCC CHECKDB with the
REPAIR_REBUILD clause to fix the damage. Is this still an appropriate
course of action given that the error reported by checkdb doesn't seem to be
the one from the event log?
One of the other dba's here said that there may be a better way to rebuild
the index than to run the repair_rebuild on the entire database. I just
wanted to double check and get some other opinions/feedback before I
continued. Any help would really be appreciated. Thank you
-John
Hi
You have corruption.
Do a full backup of the database, then run the DBCC. There is probably more
than one problem so the DBCC finds the other one first.
At the same time, look for your backups because if the corruption is bad
enough, you need to restore to you last good backup.
Regards
Mike Epprecht, Microsoft SQL Server MVP
Zurich, Switzerland
IM: mike@.epprecht.net
MVP Program: http://www.microsoft.com/mvp
Blog: http://www.msmvps.com/epprecht/
"John Rosenlof" <greyseal96@.hotmail.com> wrote in message
news:O#0LBPYMFHA.3296@.TK2MSFTNGP15.phx.gbl...
> Hi,
> I got the following error message for one of our databases:
> Event Type: Error
> Event Source: MSSQLSERVER
> Event Category: (2)
> Event ID: 17052
> Date: 3/25/2005
> Time: 9:18:53 AM
> User: XXXXXXXX\Administrator
> Computer: XXXXXX
> Description:
> Error: 644, Severity: 21, State: 3
> Could not find the index entry for RID '16c42dc515100' in index page
> (1:1725), index ID 0, database 'XXXXXXXXX_XXXXX_XXX_MSCRM'.
> I looked up the error in Books Online and it told me to run DBCC CHECKDB
to
> see the extent of the damage. It gave me the following result:
> Server: Msg 8952, Level 16, State 1, Line 1
> Table error: Database 'XXXXXXXXX_XXXXX_XXX_MSCRM', index
> 'sysobjects.ncsysobjects2' (ID 1) (index ID 3). Extra or invalid key for
the
> keys:
> Server: Msg 8956, Level 16, State 1, Line 1
> Index row (1:155:91) with values (parent_obj = 1237579447 and id =
> 365243844) points to the data row identified by ().
> DBCC results for 'XXXXXXXXX_XXXXX_XXX_MSCRM'.
> DBCC results for 'sysobjects'.
> There are 2315 rows in 49 pages for object 'sysobjects'.
> CHECKDB found 0 allocation errors and 1 consistency errors in table
> 'sysobjects' (object ID 1).
> These don't seem to match. Should they?
> The next thing that Books Online says to do is to run DBCC CHECKDB with
the
> REPAIR_REBUILD clause to fix the damage. Is this still an appropriate
> course of action given that the error reported by checkdb doesn't seem to
be
> the one from the event log?
> One of the other dba's here said that there may be a better way to rebuild
> the index than to run the repair_rebuild on the entire database. I just
> wanted to double check and get some other opinions/feedback before I
> continued. Any help would really be appreciated. Thank you
> -John
>
Showing posts with label category. Show all posts
Showing posts with label category. Show all posts
Monday, March 19, 2012
Error 644 Severity level 21
Hi,
I got the following error message for one of our databases:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 17052
Date: 3/25/2005
Time: 9:18:53 AM
User: XXXXXXXX\Administrator
Computer: XXXXXX
Description:
Error: 644, Severity: 21, State: 3
Could not find the index entry for RID '16c42dc515100' in index page
(1:1725), index ID 0, database 'XXXXXXXXX_XXXXX_XXX_MSCRM'.
I looked up the error in Books Online and it told me to run DBCC CHECKDB to
see the extent of the damage. It gave me the following result:
Server: Msg 8952, Level 16, State 1, Line 1
Table error: Database 'XXXXXXXXX_XXXXX_XXX_MSCRM', index
'sysobjects.ncsysobjects2' (ID 1) (index ID 3). Extra or invalid key for the
keys:
Server: Msg 8956, Level 16, State 1, Line 1
Index row (1:155:91) with values (parent_obj = 1237579447 and id =
365243844) points to the data row identified by ().
DBCC results for 'XXXXXXXXX_XXXXX_XXX_MSCRM'.
DBCC results for 'sysobjects'.
There are 2315 rows in 49 pages for object 'sysobjects'.
CHECKDB found 0 allocation errors and 1 consistency errors in table
'sysobjects' (object ID 1).
These don't seem to match. Should they?
The next thing that Books Online says to do is to run DBCC CHECKDB with the
REPAIR_REBUILD clause to fix the damage. Is this still an appropriate
course of action given that the error reported by checkdb doesn't seem to be
the one from the event log?
One of the other dba's here said that there may be a better way to rebuild
the index than to run the repair_rebuild on the entire database. I just
wanted to double check and get some other opinions/feedback before I
continued. Any help would really be appreciated. Thank you
-JohnHi
You have corruption.
Do a full backup of the database, then run the DBCC. There is probably more
than one problem so the DBCC finds the other one first.
At the same time, look for your backups because if the corruption is bad
enough, you need to restore to you last good backup.
Regards
--
Mike Epprecht, Microsoft SQL Server MVP
Zurich, Switzerland
IM: mike@.epprecht.net
MVP Program: http://www.microsoft.com/mvp
Blog: http://www.msmvps.com/epprecht/
"John Rosenlof" <greyseal96@.hotmail.com> wrote in message
news:O#0LBPYMFHA.3296@.TK2MSFTNGP15.phx.gbl...
> Hi,
> I got the following error message for one of our databases:
> Event Type: Error
> Event Source: MSSQLSERVER
> Event Category: (2)
> Event ID: 17052
> Date: 3/25/2005
> Time: 9:18:53 AM
> User: XXXXXXXX\Administrator
> Computer: XXXXXX
> Description:
> Error: 644, Severity: 21, State: 3
> Could not find the index entry for RID '16c42dc515100' in index page
> (1:1725), index ID 0, database 'XXXXXXXXX_XXXXX_XXX_MSCRM'.
> I looked up the error in Books Online and it told me to run DBCC CHECKDB
to
> see the extent of the damage. It gave me the following result:
> Server: Msg 8952, Level 16, State 1, Line 1
> Table error: Database 'XXXXXXXXX_XXXXX_XXX_MSCRM', index
> 'sysobjects.ncsysobjects2' (ID 1) (index ID 3). Extra or invalid key for
the
> keys:
> Server: Msg 8956, Level 16, State 1, Line 1
> Index row (1:155:91) with values (parent_obj = 1237579447 and id =
> 365243844) points to the data row identified by ().
> DBCC results for 'XXXXXXXXX_XXXXX_XXX_MSCRM'.
> DBCC results for 'sysobjects'.
> There are 2315 rows in 49 pages for object 'sysobjects'.
> CHECKDB found 0 allocation errors and 1 consistency errors in table
> 'sysobjects' (object ID 1).
> These don't seem to match. Should they?
> The next thing that Books Online says to do is to run DBCC CHECKDB with
the
> REPAIR_REBUILD clause to fix the damage. Is this still an appropriate
> course of action given that the error reported by checkdb doesn't seem to
be
> the one from the event log?
> One of the other dba's here said that there may be a better way to rebuild
> the index than to run the repair_rebuild on the entire database. I just
> wanted to double check and get some other opinions/feedback before I
> continued. Any help would really be appreciated. Thank you
> -John
>
I got the following error message for one of our databases:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 17052
Date: 3/25/2005
Time: 9:18:53 AM
User: XXXXXXXX\Administrator
Computer: XXXXXX
Description:
Error: 644, Severity: 21, State: 3
Could not find the index entry for RID '16c42dc515100' in index page
(1:1725), index ID 0, database 'XXXXXXXXX_XXXXX_XXX_MSCRM'.
I looked up the error in Books Online and it told me to run DBCC CHECKDB to
see the extent of the damage. It gave me the following result:
Server: Msg 8952, Level 16, State 1, Line 1
Table error: Database 'XXXXXXXXX_XXXXX_XXX_MSCRM', index
'sysobjects.ncsysobjects2' (ID 1) (index ID 3). Extra or invalid key for the
keys:
Server: Msg 8956, Level 16, State 1, Line 1
Index row (1:155:91) with values (parent_obj = 1237579447 and id =
365243844) points to the data row identified by ().
DBCC results for 'XXXXXXXXX_XXXXX_XXX_MSCRM'.
DBCC results for 'sysobjects'.
There are 2315 rows in 49 pages for object 'sysobjects'.
CHECKDB found 0 allocation errors and 1 consistency errors in table
'sysobjects' (object ID 1).
These don't seem to match. Should they?
The next thing that Books Online says to do is to run DBCC CHECKDB with the
REPAIR_REBUILD clause to fix the damage. Is this still an appropriate
course of action given that the error reported by checkdb doesn't seem to be
the one from the event log?
One of the other dba's here said that there may be a better way to rebuild
the index than to run the repair_rebuild on the entire database. I just
wanted to double check and get some other opinions/feedback before I
continued. Any help would really be appreciated. Thank you
-JohnHi
You have corruption.
Do a full backup of the database, then run the DBCC. There is probably more
than one problem so the DBCC finds the other one first.
At the same time, look for your backups because if the corruption is bad
enough, you need to restore to you last good backup.
Regards
--
Mike Epprecht, Microsoft SQL Server MVP
Zurich, Switzerland
IM: mike@.epprecht.net
MVP Program: http://www.microsoft.com/mvp
Blog: http://www.msmvps.com/epprecht/
"John Rosenlof" <greyseal96@.hotmail.com> wrote in message
news:O#0LBPYMFHA.3296@.TK2MSFTNGP15.phx.gbl...
> Hi,
> I got the following error message for one of our databases:
> Event Type: Error
> Event Source: MSSQLSERVER
> Event Category: (2)
> Event ID: 17052
> Date: 3/25/2005
> Time: 9:18:53 AM
> User: XXXXXXXX\Administrator
> Computer: XXXXXX
> Description:
> Error: 644, Severity: 21, State: 3
> Could not find the index entry for RID '16c42dc515100' in index page
> (1:1725), index ID 0, database 'XXXXXXXXX_XXXXX_XXX_MSCRM'.
> I looked up the error in Books Online and it told me to run DBCC CHECKDB
to
> see the extent of the damage. It gave me the following result:
> Server: Msg 8952, Level 16, State 1, Line 1
> Table error: Database 'XXXXXXXXX_XXXXX_XXX_MSCRM', index
> 'sysobjects.ncsysobjects2' (ID 1) (index ID 3). Extra or invalid key for
the
> keys:
> Server: Msg 8956, Level 16, State 1, Line 1
> Index row (1:155:91) with values (parent_obj = 1237579447 and id =
> 365243844) points to the data row identified by ().
> DBCC results for 'XXXXXXXXX_XXXXX_XXX_MSCRM'.
> DBCC results for 'sysobjects'.
> There are 2315 rows in 49 pages for object 'sysobjects'.
> CHECKDB found 0 allocation errors and 1 consistency errors in table
> 'sysobjects' (object ID 1).
> These don't seem to match. Should they?
> The next thing that Books Online says to do is to run DBCC CHECKDB with
the
> REPAIR_REBUILD clause to fix the damage. Is this still an appropriate
> course of action given that the error reported by checkdb doesn't seem to
be
> the one from the event log?
> One of the other dba's here said that there may be a better way to rebuild
> the index than to run the repair_rebuild on the entire database. I just
> wanted to double check and get some other opinions/feedback before I
> continued. Any help would really be appreciated. Thank you
> -John
>
Error 644 Severity level 21
Hi,
I got the following error message for one of our databases:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 17052
Date: 3/25/2005
Time: 9:18:53 AM
User: XXXXXXXX\Administrator
Computer: XXXXXX
Description:
Error: 644, Severity: 21, State: 3
Could not find the index entry for RID '16c42dc515100' in index page
(1:1725), index ID 0, database 'XXXXXXXXX_XXXXX_XXX_MSCRM'.
I looked up the error in Books Online and it told me to run DBCC CHECKDB to
see the extent of the damage. It gave me the following result:
Server: Msg 8952, Level 16, State 1, Line 1
Table error: Database 'XXXXXXXXX_XXXXX_XXX_MSCRM', index
'sysobjects.ncsysobjects2' (ID 1) (index ID 3). Extra or invalid key for the
keys:
Server: Msg 8956, Level 16, State 1, Line 1
Index row (1:155:91) with values (parent_obj = 1237579447 and id = 365243844) points to the data row identified by ().
DBCC results for 'XXXXXXXXX_XXXXX_XXX_MSCRM'.
DBCC results for 'sysobjects'.
There are 2315 rows in 49 pages for object 'sysobjects'.
CHECKDB found 0 allocation errors and 1 consistency errors in table
'sysobjects' (object ID 1).
These don't seem to match. Should they?
The next thing that Books Online says to do is to run DBCC CHECKDB with the
REPAIR_REBUILD clause to fix the damage. Is this still an appropriate
course of action given that the error reported by checkdb doesn't seem to be
the one from the event log?
One of the other dba's here said that there may be a better way to rebuild
the index than to run the repair_rebuild on the entire database. I just
wanted to double check and get some other opinions/feedback before I
continued. Any help would really be appreciated. Thank you
-JohnHi
You have corruption.
Do a full backup of the database, then run the DBCC. There is probably more
than one problem so the DBCC finds the other one first.
At the same time, look for your backups because if the corruption is bad
enough, you need to restore to you last good backup.
Regards
--
Mike Epprecht, Microsoft SQL Server MVP
Zurich, Switzerland
IM: mike@.epprecht.net
MVP Program: http://www.microsoft.com/mvp
Blog: http://www.msmvps.com/epprecht/
"John Rosenlof" <greyseal96@.hotmail.com> wrote in message
news:O#0LBPYMFHA.3296@.TK2MSFTNGP15.phx.gbl...
> Hi,
> I got the following error message for one of our databases:
> Event Type: Error
> Event Source: MSSQLSERVER
> Event Category: (2)
> Event ID: 17052
> Date: 3/25/2005
> Time: 9:18:53 AM
> User: XXXXXXXX\Administrator
> Computer: XXXXXX
> Description:
> Error: 644, Severity: 21, State: 3
> Could not find the index entry for RID '16c42dc515100' in index page
> (1:1725), index ID 0, database 'XXXXXXXXX_XXXXX_XXX_MSCRM'.
> I looked up the error in Books Online and it told me to run DBCC CHECKDB
to
> see the extent of the damage. It gave me the following result:
> Server: Msg 8952, Level 16, State 1, Line 1
> Table error: Database 'XXXXXXXXX_XXXXX_XXX_MSCRM', index
> 'sysobjects.ncsysobjects2' (ID 1) (index ID 3). Extra or invalid key for
the
> keys:
> Server: Msg 8956, Level 16, State 1, Line 1
> Index row (1:155:91) with values (parent_obj = 1237579447 and id => 365243844) points to the data row identified by ().
> DBCC results for 'XXXXXXXXX_XXXXX_XXX_MSCRM'.
> DBCC results for 'sysobjects'.
> There are 2315 rows in 49 pages for object 'sysobjects'.
> CHECKDB found 0 allocation errors and 1 consistency errors in table
> 'sysobjects' (object ID 1).
> These don't seem to match. Should they?
> The next thing that Books Online says to do is to run DBCC CHECKDB with
the
> REPAIR_REBUILD clause to fix the damage. Is this still an appropriate
> course of action given that the error reported by checkdb doesn't seem to
be
> the one from the event log?
> One of the other dba's here said that there may be a better way to rebuild
> the index than to run the repair_rebuild on the entire database. I just
> wanted to double check and get some other opinions/feedback before I
> continued. Any help would really be appreciated. Thank you
> -John
>
I got the following error message for one of our databases:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 17052
Date: 3/25/2005
Time: 9:18:53 AM
User: XXXXXXXX\Administrator
Computer: XXXXXX
Description:
Error: 644, Severity: 21, State: 3
Could not find the index entry for RID '16c42dc515100' in index page
(1:1725), index ID 0, database 'XXXXXXXXX_XXXXX_XXX_MSCRM'.
I looked up the error in Books Online and it told me to run DBCC CHECKDB to
see the extent of the damage. It gave me the following result:
Server: Msg 8952, Level 16, State 1, Line 1
Table error: Database 'XXXXXXXXX_XXXXX_XXX_MSCRM', index
'sysobjects.ncsysobjects2' (ID 1) (index ID 3). Extra or invalid key for the
keys:
Server: Msg 8956, Level 16, State 1, Line 1
Index row (1:155:91) with values (parent_obj = 1237579447 and id = 365243844) points to the data row identified by ().
DBCC results for 'XXXXXXXXX_XXXXX_XXX_MSCRM'.
DBCC results for 'sysobjects'.
There are 2315 rows in 49 pages for object 'sysobjects'.
CHECKDB found 0 allocation errors and 1 consistency errors in table
'sysobjects' (object ID 1).
These don't seem to match. Should they?
The next thing that Books Online says to do is to run DBCC CHECKDB with the
REPAIR_REBUILD clause to fix the damage. Is this still an appropriate
course of action given that the error reported by checkdb doesn't seem to be
the one from the event log?
One of the other dba's here said that there may be a better way to rebuild
the index than to run the repair_rebuild on the entire database. I just
wanted to double check and get some other opinions/feedback before I
continued. Any help would really be appreciated. Thank you
-JohnHi
You have corruption.
Do a full backup of the database, then run the DBCC. There is probably more
than one problem so the DBCC finds the other one first.
At the same time, look for your backups because if the corruption is bad
enough, you need to restore to you last good backup.
Regards
--
Mike Epprecht, Microsoft SQL Server MVP
Zurich, Switzerland
IM: mike@.epprecht.net
MVP Program: http://www.microsoft.com/mvp
Blog: http://www.msmvps.com/epprecht/
"John Rosenlof" <greyseal96@.hotmail.com> wrote in message
news:O#0LBPYMFHA.3296@.TK2MSFTNGP15.phx.gbl...
> Hi,
> I got the following error message for one of our databases:
> Event Type: Error
> Event Source: MSSQLSERVER
> Event Category: (2)
> Event ID: 17052
> Date: 3/25/2005
> Time: 9:18:53 AM
> User: XXXXXXXX\Administrator
> Computer: XXXXXX
> Description:
> Error: 644, Severity: 21, State: 3
> Could not find the index entry for RID '16c42dc515100' in index page
> (1:1725), index ID 0, database 'XXXXXXXXX_XXXXX_XXX_MSCRM'.
> I looked up the error in Books Online and it told me to run DBCC CHECKDB
to
> see the extent of the damage. It gave me the following result:
> Server: Msg 8952, Level 16, State 1, Line 1
> Table error: Database 'XXXXXXXXX_XXXXX_XXX_MSCRM', index
> 'sysobjects.ncsysobjects2' (ID 1) (index ID 3). Extra or invalid key for
the
> keys:
> Server: Msg 8956, Level 16, State 1, Line 1
> Index row (1:155:91) with values (parent_obj = 1237579447 and id => 365243844) points to the data row identified by ().
> DBCC results for 'XXXXXXXXX_XXXXX_XXX_MSCRM'.
> DBCC results for 'sysobjects'.
> There are 2315 rows in 49 pages for object 'sysobjects'.
> CHECKDB found 0 allocation errors and 1 consistency errors in table
> 'sysobjects' (object ID 1).
> These don't seem to match. Should they?
> The next thing that Books Online says to do is to run DBCC CHECKDB with
the
> REPAIR_REBUILD clause to fix the damage. Is this still an appropriate
> course of action given that the error reported by checkdb doesn't seem to
be
> the one from the event log?
> One of the other dba's here said that there may be a better way to rebuild
> the index than to run the repair_rebuild on the entire database. I just
> wanted to double check and get some other opinions/feedback before I
> continued. Any help would really be appreciated. Thank you
> -John
>
Sunday, March 11, 2012
Error 56
This morning, within the space of just a few minutes, we got a WHOLE lot of
these errors:
Event Type: Warning
Event Source: mraid35x
Event Category: None
Event ID: 56
Date: 1/27/2005
Time: 7:06:27 AM
User: N/A
Computer: SQL
Description:
The driver failed to allocate memory.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 10 00 01 00 66 00 .....f.
0008: 00 00 00 00 38 00 04 80 ...8..?
0010: 10 00 00 00 9a 00 00 c0 ...?..À
0018: 00 00 00 00 00 00 00 00 ......
0020: 00 00 00 00 00 00 00 00 ......
0028: 53 63 50 44 e0 01 00 00 ScPDà...
0030: 6c 69 74 75 b4 06 00 00 litu´...
I can't find any information regarding this error. We're running SQL on a
Windows 2003 server.
Thank you for your attention
mHello
Well, the first thing we are going to want to do is run chkdsk /f /r on the
server
to hopefully clear up the NTFS and FTDISK errors on the drive.
This will require a server reboot and could take over an hour to complete.
Next, we need you to delete and recreate your pagefile.sys. To do this,
1) When the Chkdsk.exe utility has completed, set the paging file size to 0.
a. Click Start, point to Settings, click Control Panel, and then
double-click
System. Click the Performance tab, click Change, and then point to the
partition
containing the Pagefile.sys file.
b. In the Initial Size (MB): box, type "0" (without the quotation marks).
c. In the Maximum Size (MB): box, type "0" (without the quotation marks).
d. Click Set, click OK, click Close, and then click Yes when you are
prompted to
restart the computer.
2) After the computer has restarted, reset the Pagefile.sys file to the
correct
size.
a. Click Start, point to Settings, click Control Panel, and then
double-click
System. Click the Performance tab, click Change, and then point to the
partition
containing the Pagefile.sys file.
b. In the Initial Size (MB): box, type a value equal to the amount of
random
access memory (in megabytes) in your computer plus 11.
c. In the Maximum Size (MB): box, type a value equal to or less than the
amount of
disk space available (in megabytes) on the specified partition minus 1.
d. Click Set, click OK, click Close, and then click Yes when you are
prompted to
restart the computer.
Hopefully this will correct the NTFS, FTDISK, and errors with your Promise
Controller.
If not, we will need to continue investigating further and review your next
memory.dmp file.
Let me know when you have completed the above actions.
Best Regards,
Regev Avivi (Mcse)
http://www.regevnet.com
<-- Please reply to the NewsGroup only -->
these errors:
Event Type: Warning
Event Source: mraid35x
Event Category: None
Event ID: 56
Date: 1/27/2005
Time: 7:06:27 AM
User: N/A
Computer: SQL
Description:
The driver failed to allocate memory.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 10 00 01 00 66 00 .....f.
0008: 00 00 00 00 38 00 04 80 ...8..?
0010: 10 00 00 00 9a 00 00 c0 ...?..À
0018: 00 00 00 00 00 00 00 00 ......
0020: 00 00 00 00 00 00 00 00 ......
0028: 53 63 50 44 e0 01 00 00 ScPDà...
0030: 6c 69 74 75 b4 06 00 00 litu´...
I can't find any information regarding this error. We're running SQL on a
Windows 2003 server.
Thank you for your attention
mHello
Well, the first thing we are going to want to do is run chkdsk /f /r on the
server
to hopefully clear up the NTFS and FTDISK errors on the drive.
This will require a server reboot and could take over an hour to complete.
Next, we need you to delete and recreate your pagefile.sys. To do this,
1) When the Chkdsk.exe utility has completed, set the paging file size to 0.
a. Click Start, point to Settings, click Control Panel, and then
double-click
System. Click the Performance tab, click Change, and then point to the
partition
containing the Pagefile.sys file.
b. In the Initial Size (MB): box, type "0" (without the quotation marks).
c. In the Maximum Size (MB): box, type "0" (without the quotation marks).
d. Click Set, click OK, click Close, and then click Yes when you are
prompted to
restart the computer.
2) After the computer has restarted, reset the Pagefile.sys file to the
correct
size.
a. Click Start, point to Settings, click Control Panel, and then
double-click
System. Click the Performance tab, click Change, and then point to the
partition
containing the Pagefile.sys file.
b. In the Initial Size (MB): box, type a value equal to the amount of
random
access memory (in megabytes) in your computer plus 11.
c. In the Maximum Size (MB): box, type a value equal to or less than the
amount of
disk space available (in megabytes) on the specified partition minus 1.
d. Click Set, click OK, click Close, and then click Yes when you are
prompted to
restart the computer.
Hopefully this will correct the NTFS, FTDISK, and errors with your Promise
Controller.
If not, we will need to continue investigating further and review your next
memory.dmp file.
Let me know when you have completed the above actions.
Best Regards,
Regev Avivi (Mcse)
http://www.regevnet.com
<-- Please reply to the NewsGroup only -->
Error 56
This morning, within the space of just a few minutes, we got a WHOLE lot of
these errors:
Event Type: Warning
Event Source: mraid35x
Event Category: None
Event ID: 56
Date: 1/27/2005
Time: 7:06:27 AM
User: N/A
Computer: SQL
Description:
The driver failed to allocate memory.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 10 00 01 00 66 00 .....f.
0008: 00 00 00 00 38 00 04 80 ...8..
0010: 10 00 00 00 9a 00 00 c0 .....
0018: 00 00 00 00 00 00 00 00 ......
0020: 00 00 00 00 00 00 00 00 ......
0028: 53 63 50 44 e0 01 00 00 ScPD...
0030: 6c 69 74 75 b4 06 00 00 litu...
I can't find any information regarding this error. We're running SQL on a
Windows 2003 server.
Thank you for your attention
mHello
Well, the first thing we are going to want to do is run chkdsk /f /r on the
server
to hopefully clear up the NTFS and FTDISK errors on the drive.
This will require a server reboot and could take over an hour to complete.
Next, we need you to delete and recreate your pagefile.sys. To do this,
1) When the Chkdsk.exe utility has completed, set the paging file size to 0.
a. Click Start, point to Settings, click Control Panel, and then
double-click
System. Click the Performance tab, click Change, and then point to the
partition
containing the Pagefile.sys file.
b. In the Initial Size (MB): box, type "0" (without the quotation marks).
c. In the Maximum Size (MB): box, type "0" (without the quotation marks).
d. Click Set, click OK, click Close, and then click Yes when you are
prompted to
restart the computer.
2) After the computer has restarted, reset the Pagefile.sys file to the
correct
size.
a. Click Start, point to Settings, click Control Panel, and then
double-click
System. Click the Performance tab, click Change, and then point to the
partition
containing the Pagefile.sys file.
b. In the Initial Size (MB): box, type a value equal to the amount of
random
access memory (in megabytes) in your computer plus 11.
c. In the Maximum Size (MB): box, type a value equal to or less than the
amount of
disk space available (in megabytes) on the specified partition minus 1.
d. Click Set, click OK, click Close, and then click Yes when you are
prompted to
restart the computer.
Hopefully this will correct the NTFS, FTDISK, and errors with your Promise
Controller.
If not, we will need to continue investigating further and review your next
memory.dmp file.
Let me know when you have completed the above actions.
Best Regards,
Regev Avivi (Mcse)
http://www.regevnet.com
<-- Please reply to the NewsGroup only -->
these errors:
Event Type: Warning
Event Source: mraid35x
Event Category: None
Event ID: 56
Date: 1/27/2005
Time: 7:06:27 AM
User: N/A
Computer: SQL
Description:
The driver failed to allocate memory.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 10 00 01 00 66 00 .....f.
0008: 00 00 00 00 38 00 04 80 ...8..
0010: 10 00 00 00 9a 00 00 c0 .....
0018: 00 00 00 00 00 00 00 00 ......
0020: 00 00 00 00 00 00 00 00 ......
0028: 53 63 50 44 e0 01 00 00 ScPD...
0030: 6c 69 74 75 b4 06 00 00 litu...
I can't find any information regarding this error. We're running SQL on a
Windows 2003 server.
Thank you for your attention
mHello
Well, the first thing we are going to want to do is run chkdsk /f /r on the
server
to hopefully clear up the NTFS and FTDISK errors on the drive.
This will require a server reboot and could take over an hour to complete.
Next, we need you to delete and recreate your pagefile.sys. To do this,
1) When the Chkdsk.exe utility has completed, set the paging file size to 0.
a. Click Start, point to Settings, click Control Panel, and then
double-click
System. Click the Performance tab, click Change, and then point to the
partition
containing the Pagefile.sys file.
b. In the Initial Size (MB): box, type "0" (without the quotation marks).
c. In the Maximum Size (MB): box, type "0" (without the quotation marks).
d. Click Set, click OK, click Close, and then click Yes when you are
prompted to
restart the computer.
2) After the computer has restarted, reset the Pagefile.sys file to the
correct
size.
a. Click Start, point to Settings, click Control Panel, and then
double-click
System. Click the Performance tab, click Change, and then point to the
partition
containing the Pagefile.sys file.
b. In the Initial Size (MB): box, type a value equal to the amount of
random
access memory (in megabytes) in your computer plus 11.
c. In the Maximum Size (MB): box, type a value equal to or less than the
amount of
disk space available (in megabytes) on the specified partition minus 1.
d. Click Set, click OK, click Close, and then click Yes when you are
prompted to
restart the computer.
Hopefully this will correct the NTFS, FTDISK, and errors with your Promise
Controller.
If not, we will need to continue investigating further and review your next
memory.dmp file.
Let me know when you have completed the above actions.
Best Regards,
Regev Avivi (Mcse)
http://www.regevnet.com
<-- Please reply to the NewsGroup only -->
Error 56
This morning, within the space of just a few minutes, we got a WHOLE lot of
these errors:
Event Type: Warning
Event Source: mraid35x
Event Category: None
Event ID: 56
Date: 1/27/2005
Time: 7:06:27 AM
User: N/A
Computer: SQL
Description:
The driver failed to allocate memory.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 10 00 01 00 66 00 .....f.
0008: 00 00 00 00 38 00 04 80 ...8..
0010: 10 00 00 00 9a 00 00 c0 .....
0018: 00 00 00 00 00 00 00 00 ......
0020: 00 00 00 00 00 00 00 00 ......
0028: 53 63 50 44 e0 01 00 00 ScPD...
0030: 6c 69 74 75 b4 06 00 00 litu...
I can't find any information regarding this error. We're running SQL on a
Windows 2003 server.
Thank you for your attention
m
Hello
Well, the first thing we are going to want to do is run chkdsk /f /r on the
server
to hopefully clear up the NTFS and FTDISK errors on the drive.
This will require a server reboot and could take over an hour to complete.
Next, we need you to delete and recreate your pagefile.sys. To do this,
1) When the Chkdsk.exe utility has completed, set the paging file size to 0.
a.Click Start, point to Settings, click Control Panel, and then
double-click
System. Click the Performance tab, click Change, and then point to the
partition
containing the Pagefile.sys file.
b.In the Initial Size (MB): box, type "0" (without the quotation marks).
c.In the Maximum Size (MB): box, type "0" (without the quotation marks).
d.Click Set, click OK, click Close, and then click Yes when you are
prompted to
restart the computer.
2) After the computer has restarted, reset the Pagefile.sys file to the
correct
size.
a.Click Start, point to Settings, click Control Panel, and then
double-click
System. Click the Performance tab, click Change, and then point to the
partition
containing the Pagefile.sys file.
b.In the Initial Size (MB): box, type a value equal to the amount of
random
access memory (in megabytes) in your computer plus 11.
c.In the Maximum Size (MB): box, type a value equal to or less than the
amount of
disk space available (in megabytes) on the specified partition minus 1.
d.Click Set, click OK, click Close, and then click Yes when you are
prompted to
restart the computer.
Hopefully this will correct the NTFS, FTDISK, and errors with your Promise
Controller.
If not, we will need to continue investigating further and review your next
memory.dmp file.
Let me know when you have completed the above actions.
Best Regards,
Regev Avivi (Mcse)
http://www.regevnet.com
<-- Please reply to the NewsGroup only -->
these errors:
Event Type: Warning
Event Source: mraid35x
Event Category: None
Event ID: 56
Date: 1/27/2005
Time: 7:06:27 AM
User: N/A
Computer: SQL
Description:
The driver failed to allocate memory.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 10 00 01 00 66 00 .....f.
0008: 00 00 00 00 38 00 04 80 ...8..
0010: 10 00 00 00 9a 00 00 c0 .....
0018: 00 00 00 00 00 00 00 00 ......
0020: 00 00 00 00 00 00 00 00 ......
0028: 53 63 50 44 e0 01 00 00 ScPD...
0030: 6c 69 74 75 b4 06 00 00 litu...
I can't find any information regarding this error. We're running SQL on a
Windows 2003 server.
Thank you for your attention
m
Hello
Well, the first thing we are going to want to do is run chkdsk /f /r on the
server
to hopefully clear up the NTFS and FTDISK errors on the drive.
This will require a server reboot and could take over an hour to complete.
Next, we need you to delete and recreate your pagefile.sys. To do this,
1) When the Chkdsk.exe utility has completed, set the paging file size to 0.
a.Click Start, point to Settings, click Control Panel, and then
double-click
System. Click the Performance tab, click Change, and then point to the
partition
containing the Pagefile.sys file.
b.In the Initial Size (MB): box, type "0" (without the quotation marks).
c.In the Maximum Size (MB): box, type "0" (without the quotation marks).
d.Click Set, click OK, click Close, and then click Yes when you are
prompted to
restart the computer.
2) After the computer has restarted, reset the Pagefile.sys file to the
correct
size.
a.Click Start, point to Settings, click Control Panel, and then
double-click
System. Click the Performance tab, click Change, and then point to the
partition
containing the Pagefile.sys file.
b.In the Initial Size (MB): box, type a value equal to the amount of
random
access memory (in megabytes) in your computer plus 11.
c.In the Maximum Size (MB): box, type a value equal to or less than the
amount of
disk space available (in megabytes) on the specified partition minus 1.
d.Click Set, click OK, click Close, and then click Yes when you are
prompted to
restart the computer.
Hopefully this will correct the NTFS, FTDISK, and errors with your Promise
Controller.
If not, we will need to continue investigating further and review your next
memory.dmp file.
Let me know when you have completed the above actions.
Best Regards,
Regev Avivi (Mcse)
http://www.regevnet.com
<-- Please reply to the NewsGroup only -->
Wednesday, February 15, 2012
Error 208
Hi,
every morning about 06.03 AM in DB PROBA there is the follow error:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 17052
Date: 6/1/2006
Time: 6:03:22 AM
User: N/A
Description:
name database: PROVA
Error: 208, Severity: 16, State: 0
Invalid object name '#tmp'.
Someone can help me to understand the reason of the error...
Thanks a lotLuca (artematico@.yahoo.it) writes:
> every morning about 06.03 AM in DB PROBA there is the follow error:
> Event Type: Error
> Event Source: MSSQLSERVER
> Event Category: (2)
> Event ID: 17052
> Date: 6/1/2006
> Time: 6:03:22 AM
> User: N/A
> Description:
> name database: PROVA
> Error: 208, Severity: 16, State: 0
> Invalid object name '#tmp'.
> Someone can help me to understand the reason of the error...
I would check for scheduled jobs running at this time.
Erland Sommarskog, SQL Server MVP, esquel@.sommarskog.se
Books Online for SQL Server 2005 at
http://www.microsoft.com/technet/pr...oads/books.mspx
Books Online for SQL Server 2000 at
http://www.microsoft.com/sql/prodin...ions/books.mspx|||I assume that this is a scheduled job
The job is looking for a temporary table #tmp, this object does not
exists, it either got dropped, is out of scope or got never created
Open up QA and run this
select * from #tmp
you will see this error message
Server: Msg 208, Level 16, State 1, Line 1
Invalid object name '#tmp'.
Take a look at the code and try to figure out if it's the object is
misspelled by mistake #tmp instead of #temp
Denis the SQL Menace
http://sqlservercode.blogspot.com/
Luca wrote:
> Hi,
> every morning about 06.03 AM in DB PROBA there is the follow error:
> Event Type: Error
> Event Source: MSSQLSERVER
> Event Category: (2)
> Event ID: 17052
> Date: 6/1/2006
> Time: 6:03:22 AM
> User: N/A
> Description:
> name database: PROVA
> Error: 208, Severity: 16, State: 0
> Invalid object name '#tmp'.
> Someone can help me to understand the reason of the error...
> Thanks a lot|||SQL Menace ha scritto:
> I assume that this is a scheduled job
> The job is looking for a temporary table #tmp, this object does not
> exists, it either got dropped, is out of scope or got never created
> Open up QA and run this
> select * from #tmp
> you will see this error message
> Server: Msg 208, Level 16, State 1, Line 1
> Invalid object name '#tmp'.
> Take a look at the code and try to figure out if it's the object is
> misspelled by mistake #tmp instead of #temp
I run this
select * from '#tmp
but there is the same error:
Server: Msg 208, Level 16, State 1, Line 1
Invalid object name '#temp'.
> Denis the SQL Menace
> http://sqlservercode.blogspot.com/
>
> Luca wrote:|||Yes you will get that error since the temp table does not exist for
your connection
Whatever code runs at that time, open it up and look where #tmp is
referenced
Denis the SQL Menace
http://sqlservercode.blogspot.com/
Luca wrote:
> SQL Menace ha scritto:
>
> I run this
> select * from '#tmp
> but there is the same error:
> Server: Msg 208, Level 16, State 1, Line 1
> Invalid object name '#temp'.
>|||SQL Menace ha scritto:
> Yes you will get that error since the temp table does not exist for
> your connection
> Whatever code runs at that time, open it up and look where #tmp is
> referenced
The code runs at 06.00 AM, how can I look where #tmp is referenced?
>
> Denis the SQL Menace
> http://sqlservercode.blogspot.com/
>
> Luca wrote:|||Enterprise Manager-->management-->SQL server Agent-->Jobs
You will see a bunch of icons in blue (succes) or Red (failed)
One of the red ones is the one that uses #tmp (you can also scroll to
the right and look at the next run date column, that will have the date
and time there)
The double click on the job, click on the steps tab and double click
step1 (it will be blue)
If the code looks like this EXECUTE master.dbo.xp_sqlmaint N'-PlanID
2C6BA936-F50A-42F9-AFA5-B88BC0251AF3 -Rpt "d:\MSSQL\LOG\DB Maintenance
Plan10.txt" -DelTxtRpt 1WEEKS -WriteHistory -RebldIdx 10
-RmUnusedSpace 50 10 ' then it is s maintainance plan and maybe you ran
out of space on your hard disk and the object could not be created
Delete stuff you don't need or move some tables to another
filegroup/hard drive (if you have multiple drives)
Or put tempdb on it's own hardrive and the LOG files also on their own
hard drive
Denis the SQL Menace
http://sqlservercode.blogspot.com/
Luca wrote:
> SQL Menace ha scritto:
>
> The code runs at 06.00 AM, how can I look where #tmp is referenced?
>|||SQL Menace ha scritto:
> Enterprise Manager-->management-->SQL server Agent-->Jobs
> You will see a bunch of icons in blue (succes) or Red (failed)
> One of the red ones is the one that uses #tmp (you can also scroll to
> the right and look at the next run date column, that will have the date
> and time there)
There isn't any red icons, they are all blu
> The double click on the job, click on the steps tab and double click
> step1 (it will be blue)
> If the code looks like this EXECUTE master.dbo.xp_sqlmaint N'-PlanID
> 2C6BA936-F50A-42F9-AFA5-B88BC0251AF3 -Rpt "d:\MSSQL\LOG\DB Maintenance
> Plan10.txt" -DelTxtRpt 1WEEKS -WriteHistory -RebldIdx 10
> -RmUnusedSpace 50 10 ' then it is s maintainance plan and maybe you ran
> out of space on your hard disk and the object could not be created
> Delete stuff you don't need or move some tables to another
> filegroup/hard drive (if you have multiple drives)
> Or put tempdb on it's own hardrive and the LOG files also on their own
> hard drive
>
> Denis the SQL Menace
> http://sqlservercode.blogspot.com/
> Luca wrote:|||Luca (artematico@.yahoo.it) writes:
> There isn't any red icons, they are all blu
You may have to inspect the job history. The job could be set up so
that it continues with the next step even on error. Or it runs a second
time, and this time it's successful.
In any case, as long everything else appears to be working normally on
your sever, it may not be worth the effort to track this down.
Erland Sommarskog, SQL Server MVP, esquel@.sommarskog.se
Books Online for SQL Server 2005 at
http://www.microsoft.com/technet/pr...oads/books.mspx
Books Online for SQL Server 2000 at
http://www.microsoft.com/sql/prodin...ions/books.mspx
every morning about 06.03 AM in DB PROBA there is the follow error:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 17052
Date: 6/1/2006
Time: 6:03:22 AM
User: N/A
Description:
name database: PROVA
Error: 208, Severity: 16, State: 0
Invalid object name '#tmp'.
Someone can help me to understand the reason of the error...
Thanks a lotLuca (artematico@.yahoo.it) writes:
> every morning about 06.03 AM in DB PROBA there is the follow error:
> Event Type: Error
> Event Source: MSSQLSERVER
> Event Category: (2)
> Event ID: 17052
> Date: 6/1/2006
> Time: 6:03:22 AM
> User: N/A
> Description:
> name database: PROVA
> Error: 208, Severity: 16, State: 0
> Invalid object name '#tmp'.
> Someone can help me to understand the reason of the error...
I would check for scheduled jobs running at this time.
Erland Sommarskog, SQL Server MVP, esquel@.sommarskog.se
Books Online for SQL Server 2005 at
http://www.microsoft.com/technet/pr...oads/books.mspx
Books Online for SQL Server 2000 at
http://www.microsoft.com/sql/prodin...ions/books.mspx|||I assume that this is a scheduled job
The job is looking for a temporary table #tmp, this object does not
exists, it either got dropped, is out of scope or got never created
Open up QA and run this
select * from #tmp
you will see this error message
Server: Msg 208, Level 16, State 1, Line 1
Invalid object name '#tmp'.
Take a look at the code and try to figure out if it's the object is
misspelled by mistake #tmp instead of #temp
Denis the SQL Menace
http://sqlservercode.blogspot.com/
Luca wrote:
> Hi,
> every morning about 06.03 AM in DB PROBA there is the follow error:
> Event Type: Error
> Event Source: MSSQLSERVER
> Event Category: (2)
> Event ID: 17052
> Date: 6/1/2006
> Time: 6:03:22 AM
> User: N/A
> Description:
> name database: PROVA
> Error: 208, Severity: 16, State: 0
> Invalid object name '#tmp'.
> Someone can help me to understand the reason of the error...
> Thanks a lot|||SQL Menace ha scritto:
> I assume that this is a scheduled job
> The job is looking for a temporary table #tmp, this object does not
> exists, it either got dropped, is out of scope or got never created
> Open up QA and run this
> select * from #tmp
> you will see this error message
> Server: Msg 208, Level 16, State 1, Line 1
> Invalid object name '#tmp'.
> Take a look at the code and try to figure out if it's the object is
> misspelled by mistake #tmp instead of #temp
I run this
select * from '#tmp
but there is the same error:
Server: Msg 208, Level 16, State 1, Line 1
Invalid object name '#temp'.
> Denis the SQL Menace
> http://sqlservercode.blogspot.com/
>
> Luca wrote:|||Yes you will get that error since the temp table does not exist for
your connection
Whatever code runs at that time, open it up and look where #tmp is
referenced
Denis the SQL Menace
http://sqlservercode.blogspot.com/
Luca wrote:
> SQL Menace ha scritto:
>
> I run this
> select * from '#tmp
> but there is the same error:
> Server: Msg 208, Level 16, State 1, Line 1
> Invalid object name '#temp'.
>|||SQL Menace ha scritto:
> Yes you will get that error since the temp table does not exist for
> your connection
> Whatever code runs at that time, open it up and look where #tmp is
> referenced
The code runs at 06.00 AM, how can I look where #tmp is referenced?
>
> Denis the SQL Menace
> http://sqlservercode.blogspot.com/
>
> Luca wrote:|||Enterprise Manager-->management-->SQL server Agent-->Jobs
You will see a bunch of icons in blue (succes) or Red (failed)
One of the red ones is the one that uses #tmp (you can also scroll to
the right and look at the next run date column, that will have the date
and time there)
The double click on the job, click on the steps tab and double click
step1 (it will be blue)
If the code looks like this EXECUTE master.dbo.xp_sqlmaint N'-PlanID
2C6BA936-F50A-42F9-AFA5-B88BC0251AF3 -Rpt "d:\MSSQL\LOG\DB Maintenance
Plan10.txt" -DelTxtRpt 1WEEKS -WriteHistory -RebldIdx 10
-RmUnusedSpace 50 10 ' then it is s maintainance plan and maybe you ran
out of space on your hard disk and the object could not be created
Delete stuff you don't need or move some tables to another
filegroup/hard drive (if you have multiple drives)
Or put tempdb on it's own hardrive and the LOG files also on their own
hard drive
Denis the SQL Menace
http://sqlservercode.blogspot.com/
Luca wrote:
> SQL Menace ha scritto:
>
> The code runs at 06.00 AM, how can I look where #tmp is referenced?
>|||SQL Menace ha scritto:
> Enterprise Manager-->management-->SQL server Agent-->Jobs
> You will see a bunch of icons in blue (succes) or Red (failed)
> One of the red ones is the one that uses #tmp (you can also scroll to
> the right and look at the next run date column, that will have the date
> and time there)
There isn't any red icons, they are all blu
> The double click on the job, click on the steps tab and double click
> step1 (it will be blue)
> If the code looks like this EXECUTE master.dbo.xp_sqlmaint N'-PlanID
> 2C6BA936-F50A-42F9-AFA5-B88BC0251AF3 -Rpt "d:\MSSQL\LOG\DB Maintenance
> Plan10.txt" -DelTxtRpt 1WEEKS -WriteHistory -RebldIdx 10
> -RmUnusedSpace 50 10 ' then it is s maintainance plan and maybe you ran
> out of space on your hard disk and the object could not be created
> Delete stuff you don't need or move some tables to another
> filegroup/hard drive (if you have multiple drives)
> Or put tempdb on it's own hardrive and the LOG files also on their own
> hard drive
>
> Denis the SQL Menace
> http://sqlservercode.blogspot.com/
> Luca wrote:|||Luca (artematico@.yahoo.it) writes:
> There isn't any red icons, they are all blu
You may have to inspect the job history. The job could be set up so
that it continues with the next step even on error. Or it runs a second
time, and this time it's successful.
In any case, as long everything else appears to be working normally on
your sever, it may not be worth the effort to track this down.
Erland Sommarskog, SQL Server MVP, esquel@.sommarskog.se
Books Online for SQL Server 2005 at
http://www.microsoft.com/technet/pr...oads/books.mspx
Books Online for SQL Server 2000 at
http://www.microsoft.com/sql/prodin...ions/books.mspx
Subscribe to:
Posts (Atom)